Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
Inlay update- http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=6062 |
Page 1 of 1 |
Author: | clavin [ Sun Apr 09, 2006 2:05 pm ] |
Post subject: | |
It's inset and glued. I plan on leveling it and to start engraving it hopefully tomorrow night. Still planning on a Tuesday ETA for the headstock- progression pics after it's done. Craig |
Author: | Bruce Dickey [ Sun Apr 09, 2006 10:29 pm ] |
Post subject: | |
Engraving, man that word just sounds impressive. Inlaid and Engraved by Master Craig Lavin. The value of the OLF FOLK Guitar just went up! I'm on pins and needles, and I know one more person who should be..... |
Author: | clavin [ Mon Apr 10, 2006 2:04 am ] |
Post subject: | |
You sure know how to keep someone going ![]() Craig |
Author: | Dave Rector [ Mon Apr 10, 2006 5:38 am ] |
Post subject: | |
Can't wait to see it Craig. That inlay looked really sweeeeet in the pics you already posted. Bet it'll look even better after you get the engraving done! |
Author: | clavin [ Mon Apr 10, 2006 6:00 am ] |
Post subject: | |
too much kids... ![]() Must go slow.. ![]() CL. |
Author: | clavin [ Mon Apr 10, 2006 8:42 am ] |
Post subject: | |
O.K it's sanded, and touched up. Nothing sanded through! (cheers from the crowd)- That is always a possibility with a reverse- set inlay- the thinnest materials are now at the surface, not the bottom where they would normally be. Waiting for glue to dry- then sand again, the engrave. Craig L. |
Author: | Bruce Dickey [ Tue Apr 11, 2006 12:14 am ] |
Post subject: | |
![]() |
Author: | LanceK [ Tue Apr 11, 2006 12:39 am ] |
Post subject: | |
Ill post the froggy here just so its in the right place. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |